This is a merged information page for Item #4766.
View normal product page.
Pololu item #:
4766
Brand:
PCX
This 16 cm (6.3″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.
Alternatives available with variations in these parameter(s): length Select variant…
Single-sided cables are also available:
Alternatives available with variations in these parameter(s): length Select variant…
Compare all products in 6-Pin JST SH-Style Cables.
6-Pin Female-Female JST SH-Style Cable 16cm. |
---|
6-Pin female JST SH-style connector. |
---|
6-Pin Female-Female JST SH-Style Cables (top to bottom: 10cm, 16cm, 25cm, 40cm, 63cm). |
---|
6-Pin Female-Female JST SH-Style Cables (left to right: 63cm, 40cm, 25cm, 16cm, 10cm). |
---|
Side-entry JST SH-style connector breakout board in a breadboard, female-female cable, and encoder with connector mounted on a Micro Metal Gearmotor. |
---|
Side-entry JST SH-style connector breakout board, female-female cable, and encoder with connector mounted on a Micro Metal Gearmotor. |
---|
Top-Entry and Side-Entry Breakout Boards for JST SH-Style Connectors, 6-Pin Male. |
---|
This cable is designed to work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connector and with side-entry connector. It consists of six twisted 28 AWG color-coded wires that are terminated on both ends by female JST SH-type connectors.
You can use the cable to connect an encoder to our JST SH-style connector breakout board (available in top-entry and side-entry versions), allowing you to easily access the motor and encoder pins on a standard solderless breadboard. Alternatively, a cable with two connector breakout boards could serve as a removable general-purpose interconnect between different parts of a modular system.
When used with our encoders, the wire color scheme is as follows:
Cable color | Function |
---|---|
Red | motor power M1 (“+” terminal) |
Black | motor power M2 (other terminal) |
Blue | encoder Vcc (2.7 V to 18 V) |
Yellow | encoder channel A output |
White | encoder channel B output |
Green | encoder GND |
|
|
For more information on how to use the encoders, see the encoder product pages.
These cables are available in double-ended and single-ended versions in a variety of lengths:
Pins: | 1×6 |
---|---|
Length: | 16 cm |
Weight: | 2 g |
Gender: | Female-Female |
---|---|
Wire gauge: | 28 AWG |
Connector: | JST SH-type |
No FAQs available.
We have expanded our selection of JST SH-style cables and connectors! These cables and connectors are ideal for use with our magnetic...