This is a merged information page for Item #2448.
View normal product page.
Pololu item #:
2448
Brand:
Generic
This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled positive and negative, with the positive terminal connected to the center contact.
Compare all products in Connectors or Terminal Blocks.
 |
DC barrel plug to 2-pin terminal block adapter. |
|---|
 |
DC barrel plug to 2-pin terminal block adapter. |
|---|
Most sources refer to this style of connector as “male”, but since it has a female basket at its center, some will refer to it as “female”. Please look at the product photos carefully to make sure this is the connector you are looking for. This connector is compatible with our DC barrel jack to 2-pin terminal block adapter and our PCB-mountable barrel jack.
|
|
Note: The positive and negative markings on the terminal block side correspond to a center-positive barrel plug (the side labeled “+” connects to the center of the barrel plug and the side labeled “-” connects to the outside); you can flip the connections to make a center-negative plug.
No FAQs available.
We are now carrying four exciting new sensors from Interlink Electronics: 0.25″-diameter circle, short tail force-sensing resistor (FSR)...