GW16148 Mini-PCIe to NVME M.2 Adapter
The GW16148 Mini-PCIe to M.2 Adapter is designed for NVME SSDs. For M.2 Modems, please see the GW16140/GW16141/GW16147.
Note: M.2 NVME drive not included
| Key Product Features | |
|---|---|
| Function: | Converts Mini-PCIe slot to M.2 M-Key Slot for NVME SSD (GW16148) |
| M.2 Key: | M-Key |
| SIM Slots: | None |
| M.2 Card Length: | 52, 50, 42 & 30mm |
| Example NVME Drives: | GW16148 Wiki |
| For Use On: | Gateworks Industrial SBCs |
- Mini-PCIe to M.2 NVME Adapter
- M.2 Key:
- M.2 M-Key Support (GW16148)
- Supports M.2 cards up to 52mm in length
- GW16148 Supports PCIe for NVME SSDs
- M-Key M.2 Socket
- Note: Uses 1x Gen 1 PCIe lane
- Supports NGFF Sizes
- 2242
- 3030
- 3042
- 3050
- 3052
- 1630 (Special Order)
- 2230 (Special Order)
- Minimal signaling to avoid pin conflicts
- Customized variations also available to support other M.2 peripherals
- -40°C to +85°C Operating Temperature
- Made in USA
The GW16148 is a Mini-PCIe to M.2 Adapter designed to allow support of M.2 NVME storage drives on Gateworks single board computers. The GW16148 adapter allow M.2 M-Key NVME drives be plugged into a Mini-PCIe slot on a Gateworks Single Board Computer. While some NVME drives use 4 lanes of PCIe, the GW16148 adapter utilizes a single Gen 1 PCIe lane. Many adapters typically have pin signal conflicts with standard specifications, so these adapters only pass through the minimum required signalling to avoid these conflicts. Many NVME drives used in consumer laptops have a extended length (80mm), longer than the maximum 52mm supported on the GW16148.
Note: Please refer to the Gateworks NVME Wiki Page for more information on NVME drives supported on the GW16148
*Disclaimer: This card has only been tested on Gateworks Single Board Computers. Gateworks only provides support when used on a Gateworks SBC.*